SBC

Banana Pi M2Ultra Introduction
















Banana Pi BPI-M2 Ultra is powered by Allwinner R40 SoC on board 2GB of 
RAM and 8GB eMMC. It also has onboard WiFi, 2 USB A 2.0 ports, 1 USB OTG port, 1 HDMI port, 1 audio jack, a DC power port, and last but not least, a SATA port.
Also being a member of the Banana Pi family, the M2 Ultra is a direct upgrade from the Banana Pi M1/M1+ that support SATA from the SoC. The SATA performance on the R40 is fitting for media related projects such as storage servers. Backed by our community, starting a project and building servers is fun and rewarding. We welcome all companies, DIY makers, and tech loving people within our community! Together, we can make a difference, we can discover our passions, inspire others, and build a practical project.
Key Features
  • Quad Core ARM Cortex A7 CPU
  • 2GB DDR3 SDRAM
  • 8 GB eMMC storage
  • WiFi & Bluetooth
  • On board SATA 
Specification:
CPU              A64 1.2 Ghz Quad-Core ARM Cortex A53 64-Bit Processor
GPU              MALI-400 MP2 @ 500MHz
Memory          2GB DDR3 (shared with GPU)
Storage  MicroSD Card up to 64GB; 8GB eMMC 
Network 10/100/1000Mbps ethernet (Realtek RTL8211E/D)
WiFi 802.11 b/g/n (AP6212)
BT BT4.0 (AP6212)
Video In        CSI supports 8-bit YUV422 CMOS sensor, CCIR656 protocol for NTSC and PAL,
5MP camera, 1080p video @30Hz
Video Out        HDMI 1.4 1080P60, MIPI DSI for RAW LCD panels
Audio Out         3.5 mm Jack and HDMI
Audio In           On board microphone
Power 5V 2A DC port
USB Ports        3x USB 2.0, USB OTG(Micro USB)
Buttons           Reset button, Power button, U-boot button
GPIO 40 Pins: GPIO, UART, I2C bus, I2S bus, SPI bus, PWN, +3.3v, +5v, ground
LED              Power status Led and RJ45 Led
IR Onboard IR receiver
OS               Android, Linux & Win10
Dimensions      92mm x 60mm
Weight            45g


Banana Pi M64 Introduction


Banana Pi BPI-M64 is powered by Allwinner A64 SOC features a 64-bit quad-core Cortex-A53 ARM CPU, and a Mali400MP2 GPU from ARM. It features 2GB of RAM and 8GB eMMC. It also has onboard WiFi and BT. On the ports side, the BPI-M64 has 2 USB A 2.0 ports, 1 USB OTG port, 1 HDMI port, 1 audio jack, and lastly a DC power port. 
Banana Pi is an open platform device, it is for anyone who wants to play and build with developer technology instead of simply using consumer technology. Backed by our community, starting a project and building servers is fun and rewarding. We welcome all companies, DIY makers, and tech loving people within our community! Together, we can make a difference, we can discover our passions, inspire others, and build a practical project.
Key Features

  • 1.2 Ghz Quad-Core ARM Cortex A53 64-Bit Processor.
  • 2GB DDR3 SDRAM with 733MHz.
  • GB eMMC storage
  • WiFi & Bluetooth 
Specification:

CPU              A64 1.2 Ghz Quad-Core ARM Cortex A53 64-Bit Processor
GPU              MALI-400 MP2 @ 500MHz
Memory          2GB DDR3 (shared with GPU)
Storage  MicroSD Card up to 64GB; 8GB eMMC 
Network 10/100/1000Mbps ethernet (Realtek RTL8211E/D)
WiFi 802.11 b/g/n (AP6212)
BT BT4.0 (AP6212)
Video In        CSI supports 8-bit YUV422 CMOS sensor, CCIR656 protocol for NTSC and PAL,
5MP camera, 1080p video @30Hz
Video Out        HDMI 1.4 with resolutions (upto 4K @24Hz), MIPI DSI for RAW LCD panels
Audio Out         3.5 mm Jack and HDMI
Audio In           On board microphone
Power 5V 2A DC port
USB Ports        2x USB 2.0, USB OTG(Micro USB)
Buttons           Reset button, Power button, U-boot button
GPIO 40 Pins: GPIO, UART, I2C bus, I2S bus, SPI bus, PWN, +3.3v, +5v, ground
LED               Power status Led and RJ45 Led
IR Onboard IR receiver
OS               Android & Linux
Dimensions      92mm x 60mm
Weight            45g



Banana Pi M3 Introduction

Banana Pi M3 is powered by Allwinner A83T octa-core processor on board 2GB of RAM, Gigabit Ethernet, 2 USB, SATA, WiFi, BT and HDMI connection. It can run on a variety of operating systems including Android, Lubuntu, Ubuntu, Debian, and Raspbian etc. as well as Tensorflow.
Banana Pi is an open platform device, it is for anyone who wants to play and build with developer technology instead of simply using consumer technology. Backed by our community, starting a project and building servers is fun and rewarding. We welcome all companies, DIY makers, and tech loving people within our community! Together, we can make a difference, we can discover our passions, inspire others, and build a practical project.
Key Features
  • Octa-core 1.8GHz Powerful CPU
  • 2 GB LPDDR3 memory
  • GB eMMC storage
  • WiFi & Bluetooth 
  • On board SATA
Specification:
CPU              A83T ARM Cortex-A7 octa-core,512 KB L1 cache 1 MB L2 cache
GPU              PowerVR SGX544MP1· Comply with OpenGL ES 2.0, OpenCL 1.x, DX 9_3
Memory          2GB DDR3 (shared with GPU)
Storage  MicroSD Card up to 64GB; SATA up to 2TB; EMMC 8GB 
Network 10/100/1000Mbps ethernet (Realtek RTL8211E/D)
WiFi 802.11 b/g/n (AP6212)
BT BT4.0 (AP6212)
Video In        Parallel 8-bit camera interface MIPI Camera serial Interface(CSI)
Video Out        HDMI 1.4 DHCP 1.2 with resolutions from(640x640 to 1920x1080), MIPI DSI for RAW LCD panels
MIPI DSI for RAW LCD panels
Audio Out         3.5 mm Jack and HDMI
Audio In           On board microphone
Power Micro USB, optional 5V DC port (center positive 1,6 x 4,4mm)
USB Ports        2x USB 2.0, USB OTG(Micro USB)
Buttons           Reset button, Power button, U-boot button
GPIO 40 Pins: GPIO, UART, I2C bus, I2S bus, SPI bus, PWN, +3.3v, +5v, ground
LED              Power LED(red), RJ45 LED(blue), user define LED(green)
IR On board IR receiver
OS               Android & Linux
Dimensions      92mm x 60mm
Weight            45g